JOINT
REPAIRS
Hydrotite is designed to create an effective seal to repair failed construction joints.
Joints are sealed by the compression of integral hollow cores within its composite rubber profile and are supported by Hydrotite’s capability for residual expansion.
Narrow Joint Repairs
Different Hydrotite profiles and sizes are available for joint repairs up to 30mm width.
Wide Joint Repairs
Specialized applications for large aperature construction joint openings of 40mm to 60mm width.
Technical Information Downloads
CJ-0725 Data Sheet (English | French)
CJ-0725 SDS (English | French)
Installation Guidelines
Profile Selection Guidelines
Specification for Construction Joints
Technical Information Downloads
CJ-1020 Data Sheet (English | French)
Installation Guidelines
Profile Selection Guidelines
Technical Information Downloads
CJ-2020 Data Sheet
CJ-2020 SDS (English | French)
Installation Guidelines
Profile Selection Guidelines
Technical Information Downloads
CJ-3030 Data Sheet
CJ-3030 SDS (English | French)
Installation Guidelines
Profile Selection Guidelines
Given a joint with an aperture of 48 mm, use a diamond blade to skin the joint to a uniform width of 50 mm. Prepare an assembly of CJ-2020, 10 mm hdpe. Insert block, CJ-2020. Total width of assembly = 50 mm.
Technical Information Downloads
CJ-2020 Data Sheet
CJ-2020 SDS (English | French)
Installation Guidelines
Profile Selection Guidelines